Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Cylinder Head - Unleaded Fuel Use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this. See bottom for useful part numbers. The situation not at all being helped by all sorts of conflicting information from 'leaned' sources, such as lead levels in humans has declined greatly since 1935 - despite the rapidly expanding ownership of petrol-burning vehicles. And benzene and toluene used in unleaded fuels are cancerous. Still, the powers that be are relentlessly forcing through the 'no heavy metals in fuel' bills, not being at all put off by such trivia. Not surprising bearing in mind the complete debacle on the catalytic converter front - the type decided on for world wide and universal use was developed and tested in California!

Engine - 1098, Initial Tuning

The 1098 (1100) engine has had a lot of bad press over the years - largely because of early experiences when trying to tune the motor brought about problems with the then standard components available - they simply were not up to taking any real punishment as experienced in racing.

See bottom for useful part numbers.

This fallacy was handed down generation to generation like some scary bedtime story. Those that have used the unit in more recent years, employing more capable componentry know what a demon motor this can be. Following is an initial look at what it will do with a little modification - the results compared directly with it's smaller brother the 998 for illustration of the potential.

Abridged History
When the Mini was first conceived it ustilised a de-stroked version of the then quite remarkable 948cc A-series engine.

Engine - Running in Procedure

This is another of those subjects that crops up on the message board frequently. I am constantly surprised by the number of engine builders - or people who charge other folk for building engines at any rate - that never hand out such an information sheet. It seems pretty daft to me that having taken a wad of money off of a customer for an engine you've lovingly put together, you'd want to help that person get the very best out of the engine. And the running/breaking in procedure is absolutely crucial. It at least ensures no damage is incurred when the engine first bursts into life. A collection of the usual suspects have explained their own methods on the board, along with various others - many of which probably work just as well for them, a few which are down-right dubious. Following is a sheet I administer with every customer engine I build.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

Cylinder Head - Unleaded fuel use

The specter of 'unleaded fuel only' - instigated in UK on January 1st 1999 and seemingly from decades ago across the rest of the world - seems to be forcing more and more folk into frightened, panic orientated action. And Mini owners are featuring heavily in this.

RUNNING IN NEW ENGINES

Install engine. It is absolutely imperative that the cooling system is more than sufficient to deal with any temperatures likely to be produced by the engine. More power means more heat to be dissipated. A standard radiator is very unlikely to be able to cope with a reasonable power increase over standard.

Do not fill cooling system yet. Set clutch throw-out and free-play take up. Double-check all connections electrical, oil, fuel and cooling system. Put in engine oil – use a cheap multi-grade mineral oil. DO NOT use either semi or full synthetic oils. They will stop the rings from bedding in. Remove spark plugs, and spin engine over in bursts of a few seconds to pick up oil pressure and prevent starter motor damage. DO NOT start engine until oil pressure picks up.

Once oil pressure is showing, check ignition timing statically. Set to figure advised by distributor maker, or if no figures available, set at around 6-8 degrees BTDC. Re-fit spark plugs a

Engine transplants - initial information and engine choices

Is this familiar? - You take the small one out; you put the big one in. In, out, in, out, shake your fist about, you do the hokey-cokey and you turn around, that’s what it’s all about...

Terminology -
BBU - Big Bore Unit
SBU - Small Bore Unit
Bodge - English term for 'make do' engineering- assured to fail at an in opportune
Moment.
Dizzy - Distributor

NOTE; this information is largely for transplanting large-bore units into small-bore engined cars.

Is this familiar? - You take the small one out; you put the big one in. In, out, in, out, shake your fist about, you do the hokey-cokey and you turn around, that’s what it’s all about...kinda sums up the situation many folk find themselves in when attempting to endow their beloved Min with a more impressive turn of speed.

Ignition - What's needed

Firstly - re-runs or re-hashes of technical literary prose always brings to light either new, or old forgotten subjects for close scrutiny/re-examination. The arrival of 'A Well Known A-Series Tuning Bible' is no exception. Good news as far as I'm concerned as it keeps me gainfully employed!

This dissertation is centred upon that old chestnut 'ignition systems'. Technological advances running through the entire automotive world hasn't ignored the system that supplies life-giving sparks to bring your engine alive. It's true - no spark, no power. Much of the technology applied has been about making bigger, fatter, longer lasting, and more consistent sparks. The plethora of Mini spares suppliers have embraced this whole-heartedly as it's another string to their bows of profit generation. And it's this that's causing the problem - again Mini owners are being sold stuff that they don't need, or more pointedly will NOT increase power out-puts one iota.

SU Carbs - The history

Practically every Mini owner can name the brilliant engineer responsible for our obsession. Many can name the man responsible for the rubber suspension spring.

A goodly number know a fair bit about the engine's heritage and the man who came up with the extremely efficient cylinder head design.They account for the biggest chunks of the Mini's anatomy. But what about that other extremely simple yet hugely effective instrument that features so prominently when engine tuning occurs - the SU carburetter? A limited few can tell you what 'SU' stands for, extremely few have any idea of its concept and evolution. So let's put that right… In the beginning Strangely enough, it all started way back with William Banks Skinner; one of the owners/directors of the well-known Lilly and Skinner footwear distributors.

Standard Classic Mini Winter Checks

In order to keep your Mini in full working order this winter, we have put together a small guide of things to check, besides the routine servicing

Cooling System
Antifreeze is a must in a Mini for the winter. A Winter mix of Antifreeze to water over the winter will stop any potential problems with freezing conditions.
Cooling Hoses. Check the condition of all...

2015 Rallye Monte Carlo Historique – Summary

Top Mini Best British finisher 1st International Rally Drivers Club Team car (Tyresoles Trophy) 2nd Class for 1962-65 cars up to 1300cc 59th overall out of 320

Historical Article - Nov 1991 - A SERIES EVO L.S.D. Part 2

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Historical Article - Nov 1991 - A SERIES EVO L.S.D. Part 2

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Historical Article - Nov 1991 - A SERIES EVO L.S.D. Part 2

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Historical Article - Nov 1991 - A SERIES EVO L.S.D. Part 2

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Historical Article - Nov 1991 - A SERIES EVO L.S.D. Part 2

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Historical Article - October 1993 - Calver's Clinic

Calver's Clinic There are many small side issues, problems, technical hints and general advice that do not warrant a full story, but never the less are important enough to cover. To this end I will be using "Calver's Clinic" as a regular feature in Mini T ech News to cover such things.A friend and colleague of Mini Spares runs the "Mincomp Mini " in America. His name is Bill Gilcrease - those of you who have read Mini Tech News 1 may recall that he was in this issue covering his escapades at the USA run-offs in Atlanta